ZyXEL Communications P-2612HNU-Fx Quick Start Manual page 9

You must use the same method on the P-2612HNU-Fx
and the wireless client.
Push Button Configuration
1. Place a WPS-enabled device that is installed in your
system and supports the WPS Push Button method
within range of the P-2612HNU-Fx.
2. Press the WLAN button on the P-2612HNU-Fx's top
panel for five seconds.
3. Use the WPS-enabled device's WPS button. It can
be either a button in the utility or a physical button.
See the device's documentation if you cannot locate
the WPS button. It doesn't matter which button is
pressed first. You must press the second button
within two minutes of pressing the first one.
4. The P-2612HNU-Fx and the wireless device
establish a secure connection. This can take up to
two minutes.
Congratulations! Your computer is now ready to connect
to the Internet wirelessly through your P-2612HNU-Fx.
9