ZyXEL Communications P-2612HNU-Fx Quick Start Manual page 5

1. Do one of the following for your Internet connection:
a. DSL: Use a telephone wire to connect this port to
a telephone jack (or the DSL or MODEM jack on a
splitter, if you have one).
b. WAN: If you have a DSL router or modem already
in your network or you want to use a cable
modem, push the DSL/WAN switch to the WAN
side and use an Ethernet cable to connect this
port to an Ethernet jack with Internet access.
2. ETHERNET: Use an Ethernet cable to connect a
computer to one of these ports for initial
configuration and/or Internet access.
3. USB 2.0: There are two USB ports on your P-
2612HNU-Fx, one is at the back panel and one is
one the side panel. You can do the following:
a. Connect a USB (version 2.0 or lower) memory
stick or a USB hard drive for file sharing. The P-
2612HNU-Fx automatically detects the USB
device. Alternatively, use a USB cable (not
provided) to connect a USB (version 2.0 or lower)
printer to this port.
5