ZyXEL Communications P-2612HNU-Fx Quick Start Manual page 6

b. Insert a 3G adapter to access the Internet
wirelessly via a 3G network. The P-2612HNU-Fx
uses this 3G WAN connection as a backup when
the DSL/Ethernet WAN connection fails.
4. PHONE: Use a telephone cable (and any telephone
adaptor provided with your P-2612HNU-Fx) to
connect a telephone to the PHONE 1 or PHONE 2
port. If you only have one telephone, you should use
port 1.
5. Use the power adaptor provided with your P-
2612HNU-Fx to connect an appropriate power
source to this socket.
6. Push the power button to the on position.
Look at the LEDs (lights) on the top panel of the P-
2612HNU-Fx.
• The POWER light blinks during start-up and is green
once the P-2612HNU-Fx is ready.
• An ETHERNET light turns on if the corresponding
ETHERNET port is properly connected. An Ethernet
port's light blinks when the P-2612HNU-Fx is sending
or receiving data through it.
6