Daewoo DTD-29M1 MEO Service Manual page 43

PIN NAME
27 REF. R A terminal should be connected with
resistance to stabilize internal current
sources.
Connect 5.6
28 ABCL IN An input terminal for ABL/ACL control.
Control voltage range is 5.5~6.0V.
The ratio of ABL versus ACL can be set by
bus control.
29 H ARC FILTER A terminal should be connected with H.AFC
Filter to GND. The DC voltage of this pin
controls the H VCO frequency.
30 FBP IN/ SCP An input terminal for FBP .
OUT The V and GP Pulses are overlaid as SCP .
31 H VCC (9V) A Vcc terminal for DEF circuit, HOUT, IICBUS
POR, etc.
Supply 9V.
FUNCTION
1% resistance to GND.
- 8 -
IC DESCRIPTION
INTERFACE
6.8k
27
49k
29
100k
-
30
-
APPENDIX
31
33
31
33
31
33