IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL LOCAL CONTROL FRONT BACK MAIN VOLUME PROGRAMME REMOTE VIDEO VIDEO 2 HEAD STAND-BY REMOTE DOWN/UP DOWN/UP SENSOR POWER MENU TV/VIDEO BUTTON INPUT (MONO) PHONE INDICATOR SENSOR BUTTON BUTTONS BUTTONS (OPTION) (MONO) VIDEO 1 MONITOR VIDEO 2 MENU...
CONTENTS * Identity of features on Local and Remote Control * Important safeguards * Installation After moving the set Inserting Batteries into the Remote Control Unit Aerial connection Mains connection First installation of TV * Switching the set on and off Switching On Switching Off Language selection...
IMPORTANT SAFEGUARDS Water / Moisture: Never install the set in the following places: in the bathroom, in a wet basement. Do not place any containers with liquid (e.g. flower vases) on the set. Heat: Never place the set near heat source(e.g. radiator) Ventilation: Do not cover the ventilation openings on the cabinet.
INSTALLATION AFTER MOVING THE SET If the used set is moved or placed in a different direction, the ON/OFF button must be switched off for at least 15minutes in order to take out a colour stain on the screen. INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT Press down the battery compartment grip and slide the cover.
SWITCHING THE SET ON AND OFF SWITCHING ON AND OFF Switching On Switch the set on with the MAIN POWER button in front of the receiver. The set will turn on. If not, press either : - PR UP or DOWN buttons on the front of set - or POWER button or the UP/DOWN buttons or one of the NUMBER buttons 0..9 on the remote controller.
TUNING THE TV CHANNELS AUTOMATIC TUNING SYSTEM Press the menu button to select the “INSTALL” Press the right button and then select a sound system. Press the right button to start AUTO SETUP. Please wait until the EDIT menu appears EDIT DELETE PROGRAMME POSITION DATA Press the menu button to select the EDIT menu and move the...
FINE TUNING If you can’t get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the fine tuning. Move the cursor to FINE TUNE and press left/right buttons to activate fine tuning. It operates only when the left/right buttons is being pressed. The changes are memorized automatically.
DAILY USE SELECTIING A PROGRAMME The set has a total of 100 pragramme numbers, 00..99. The NUMBER buttons 0..9 are used for direct programme selection. In order to select two-digit programme, press the second numbered button within two seconds. PR UP/DOWN bottons are used for changing the stored channel step by step.
PICTURE CONTROL NORMAL PICTURE SELECTION When you press the NORMAL button repeatedly you can call up three picture settings; for Normal I(hard picture), Normal II(soft picture), Favourite(adjustable picture). PICTURE CONTROL Press the MENU button to call up the Menu. Press the RIGHT button to call up the Picture menu. You can select each function with the UP/DOWN buttons.
PICTURE-IN-PICTURE To Watch a external source as a sub-picture Press the PinP button to display a sub-picture. Press the sub TV/VIDEO button repeatedly to select the input for the sub picture. A TV picture will appear repeatedly..) (AV1 To Swap the main and sub-picture Press the SWAP button when a picture-in-picture is displayed.
RECALL The RECALL button is used to display the current status: program number, station name, clock and system. This display appear for about 5 seconds unless any button is pressed. CHANNEL LOCK You can prevent the watching of the desired programme channel. Press the CH.LOCK button on the remote control.
CONNECTING THE EXTERNAL EQUIPMENT HEADPHONE JACK NOTE 1. If you play a mono VCR, video Insert the headphone plug (3.5mm•’ ) into the headphone socket. disk player, video game or The sound from the speaker will be cut off. camcorder, connect the Audio out line of the external equipment to FRONT(SIDE) / BACK AV JACK, BACK SCART JACK the L(MONO) socket of the TV...
Page 14
INDEX PAGE You can switch directly to the programme preview (with TOP text) or the overview page of the station you are currently viewing by pressing the INDEX( )button CALLING UP SUBPAGE DIRECTLY Pressing the SUBPAGE ( ) button, “Page No. / Subpage No.” appears at the botton of the screen.