Engine Oil Change - Honda GENERATOR EB3800X Owner's Manual

Engine Oil Change

Drain the oil while the engine is warm to assure rapid and complete
draining.
1. Place a suitable container below the engine to catch the oil, then
remove the oil drain plug and sealing washer, remove the oil filler
cap/dipstick, and drain the oil.
2. Reinstall the oil drain plug and a new sealing washer. Tighten the
plug securely.
3. Refill with the recommended oil (see page
OIL DRAIN PLUG
Wash your hands with soap and water after handling used oil.
Improper disposal of engine oil can be harmful to the environment. If
you change your own oil, please dispose of it properly. Put it in a
sealed container, and take it to a recycling center. Do not discard it in a
trash bin, dump it on the ground, or pour it down a drain.
SEALING WASHER
OILFILLER CAP/DIPSTICK
31 ) and check the oil level.
UPPER LEVEL
39