Verify Driver Installation - NETGEAR WAG511 User Manual

8. The Choose Destination Location screen will display the default Destination Folder. If you
want to change the default folder, click Browse and choose a different destination folder.
9. Then, click Next to continue to the next screen.
10. Modify the Program Folders field, if desired. Click Next to continue. InstallShield will
start copying files onto your system.
11. Click Finish to complete installing the Configuration Utility.
4
Install the WAG511 Wireless PC Card
1. With the LED indicators facing up, insert the
WAG511802.11a/b/g Wireless PC Card into the CardBus
slot on your computer as shown here.
2. Windows will automatically detect the WAG511
802.11a/b/g Wireless PC Card and the Found New
Hardware Wizard dialog box will appear.
3. Follow the on-screen instructions to install the driver for the
WAG511 802.11a/b/g Wireless PC Card.
• For Windows 98/ME users, once the [Please insert the
disk labeled "Windows 98/ME CD-ROM," and then click OK] window appears,
enter the path corresponding to the appropriate drives and click OK. Usually these
files can be found at C:\Windows or C:\Windows\System.
• For Windows 2000 users, a Digital Signature Not Found message may appear. Click
Yes to proceed.
• For Windows XP users, a Windows Logo Testing Not Found dialog box may appear.
Click Continue Anyway to proceed.
4. Click Finish to complete the installation.

Verify Driver Installation

It is a good idea to confirm that the WAG511 802.11a/b/g Wireless PC Card has been
properly installed. Follow the instructions that apply to your computer system:
1. From the Windows desktop, right-click My Computer.
2. Click Properties.
3. Open Device Manager:
Windows 98/ME users – Select the Device Manager folder tab.
Windows 2000/XP users – Select the Hardware folder tab, and click on the Device
Manager button.
Notebook with
WAG511 Dual Band
Wireless PC Card
5