Kenwood DNX890HD Quick Start Manual page 72

Return to the Top page
Bluetooth Operation
*1 Y ou can sort the list to begin with touched
character.
• Characters with no corresponding name
will not appear.
• During search, a non-accent character
such as "u" is searched for instead of an
accent character such as "ü".
*2 Y ou can set the list to arrange in the order
of last name or first name. For details, see
Hands-Free Setup (P.84).
NOTE
• While your car is moving, some functions are
disabled for safety reasons. The keys associated
with the disabled functions become ineffective
if touched.
• The status icons such as battery and antenna
displayed may differ from those displayed on the
cell-phone.
• Setting the cell-phone in the private mode can
disable the hands-free function.
78 78
Receiving a call
1
Touch [ ] to answer a phone call or
[ ] to reject an incoming call.
NOTE
• While monitoring the camera view, this screen
does not appear even if a call comes in. To display
this screen, press the <TEL> button or return the
shift knob of car to the driver position.
Operations during a call
Adjust the receiver volume
Press the <∞> or <5> button.
Turn the volume knob.
Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
Switching the speaking voice output
Touching [ ]/ [ ] each time
switches the speaking voice output between
cell-phone and speaker.
Return to the Top page
Bluetooth Operation
Phone number preset
You can register frequently used phone
numbers to this unit.
1
Enter the number you want to register
in Hands Free screen.
2
Touch [Preset 1], [Preset 2], or [Preset 3]
for 2 seconds in the Hands Free screen.
79