Installation Procedure - Kenwood DNX890HD Quick Start Manual

DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT

Installation Procedure

Supplied accessories
First of all, make sure that all
accessories are supplied with the
unit.
1 ...1 7 ...6
2 ...1 8 ...6
3 ...1* 9 ...1
4 ...2 0 ...1
5 ...1* -...1
6 ...1* = ...1
(3.5 m)
(3 m)
*
23
Unit
1 To prevent a short circuit, remove
the key from the ignition and
disconnect the terminal of the
battery.
2 Make the proper input and
output wire connections for each
unit.
3 Connect the speaker wires of the
wiring harness.
4 Connect the wiring harness wires
in the following order;
ground, battery, ignition.
5 Connect the wiring harness
connector to the unit.
6 Install the unit in your car.
7 Reconnect the terminal of the
battery.
8 Press the <Reset> button.
(P.4)
9 Perform the Initial Setup.
See First Step (P.6).
● Non-Japanese cars
Bend the tabs of the
mounting sleeve
with a screwdriver
or similar utensil and
attach it in place.
Continued