CONTROL & FEATURES
Oil Alert Indicator
The Oil Alert system is designed to prevent engine damage caused
by an insufficient amount of oil in the crankcase. Before the oil level in
the crankcase can fall below a safe limit, the Oil Alert indicator comes
on, and the Oil Alert system automatically will stop the engine (the
engine switch will remain in the ON position).
The i-Monitor display will show ''OIL'' on the screen and the Oil Alert
indicator illuminates.
If the engine stops or the Oil Alert indicator comes on when you turn
the engine switch to START or pull the starter grip, check the engine
oil level (see page
Even when oil is added to the engine, the generator will not restart
until the Oil Alert indicator is reset. To reset the Oil Alert indicator, turn
the engine switch OFF, add the proper amount of oil (see page
and then turn the engine switch back ON.
18
45
) before troubleshooting in other areas.
OIL ALERT
(RED)
It blinks.
46
),