Overload Alarm (Indicator); Oil Alert ® Indicator - Honda EU22000i Owner's Manual

CONTROLS & FEATURES

Overload Alarm (Indicator)

If the generator is overloaded (in excess of 2.2 kVA), or if there is a short
circuit in a connected appliance, the overload indicator (red) will come
ON. The overload indicator (red) will stay ON, and after about four
seconds, current to the connected appliance(s) will shut off, and the
output indicator (green) will go OFF. However, the engine will continue
to run.
If the overload indicator blink continuously,it suggests an abnormal of
inverter unit (see page 68).
®
Oil Alert Indicator
®
The Oil Alert system is designed to prevent engine damage caused
by an insufficient amount of oil in the crankcase. Before the oil level in
the crankcase can fall below a safe limit, the Oil Alert indicator (red)
comes ON and the Oil Alert system automatically will stop the engine
(the engine switch will remain in the ON position).
If the engine stops or the Oil Alert indicator (red) comes ON when you
pull the starter grip, check the engine oil level (see page 49) before
troubleshooting in other areas.
20
OVERLOAD INDICATOR
(RED)
OIL ALERT INDICATOR
(RED)