Wiring Connection - Kenwood KDC-258U Instruction Manual

Wiring connection

KDC-258U
KDC-158U
KDC-118U
Rear/ subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
KDC-MP258U
KDC-MP158U
Front output
Rear/ subwoofer output
Fuse (10 A)
White
Light blue/yellow
White/Black
(Steering remote
control wire)
Gray
Gray/Black
Blue/White
Green
(Power control wire)
Green/Black
Purple
Purple/Black
Brown
(Mute control wire)
Red
(Ignition wire)
Blue
Yellow
(Antenna control
(Battery wire)
wire)
If no connections are made, do not let the wire
come out from the tab.
KDC-MP258U
For
To the steering wheel remote control
adapter
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
To the terminal that is grounded when the
telephone rings or during conversation.
(To connect the Kenwood navigation system,
refer your navigations manual.)
(Not used)
Part list for installation
(A) Faceplate
(B) Trim plate
KDC-MP158U
/ :
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
ENGLISH | 15