Navigator Module; Navigator Software; Transfer A Design From The Computer Via The Usb - Husqvarna Viking Huskystar EM10 User Manual

Navigator Software

The Navigator software is
launched whenever your machine
is connected to the computer and
the machine is on. This software
communicates with the machine.
Transfer a design from the
computer via USB
1. To open a design from internal
memory, click on the square
labeled No Design (Fig. N-1).
After you have loaded any
design, the name of the current
design will be shown below the
box.
2. The Retrieving Design
Information (Fig. N-2) box
appears, stating "Currently
working on pulling information
from your machine." When the
progress bar is complete, a
Select Different Design screen
shows the fi rst nine internal
memory design images (Fig.
N-3).
N-1
N-2
N-3
CONNECTIVITY TO
YOUR COMPUTER

Navigator Module

In the Navigator
module, you can:
a) Select designs
for stitching from
the machine's
internal memory.
b) Delete designs
from the
machine's
internal memory.
c) Send designs
from the
machine's
internal memory
to the design
application.
d) Move to a
specifi c point in
a design.
29