Table of Contents
Advertisement
The upgrade is complete. Turn your mount power off then on again.
Typical Errors:
1. Invalid Port Number: in Device Manager: make sure you have the correct COM port
number for CP210x.
2. Screen is now blank: Wrong ".bin" file: make sure you have the correct ".bin" file for
firmware upgrade.
3. Wrong downloader: you should use iOptron Downloader instead of the Flash
Downloader.
4. Use cp210x driver provided by iOptron. The newest version from SiLab may not work
properly for iOptron's hand controller.
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569‐0200 | Toll Free (866) 399‐4587 | www.iOptron.com
43
Advertisement
Table of Contents
