A. Sensor Pwb; B. Pickup Solenoid; C. Clutch - Sharp AR-168S Service Manual

1) Remove the belt, the paper feed frame Spring, and two harnesses.
2) Remove the pickup unit.
1
* When installing the parts, be careful of the hole position of the paper
frame Spring.

A. Sensor PWB

1) Remove two screws from the bottom of the pickup unit.
2) Remove the upper cover.
2
1
1
2
3
4
3
1
1
1
AR-168S/168D DISASSEMBLY AND ASSEMBLY 8 - 19
1) Remove two screws.
2) Remove the sensor PWB.
3) Remove the harness.
1
2

B. Pickup solenoid

1) Remove two screws.
2) Remove the pickup solenoid
2
* When installing, hang iron core A on the solenoid arm.

C. Clutch

1) Remove the E-ring.
2) Remove the pulley and bush.
3) Slide the bush in the arrow direction.
4) Lift the clutch, and 5) remove the clutch.
5
3
1
3
1
A
2
1
4