Sharp AR-168S Service Manual page 114

Main Sub
Contents
code code
66 11 300bps signal send (Max.
value) (Executable only
when the FAX is installed.)
12 300bps signal send (Soft
SW set value) (Executable
only when the FAX is
installed.)
[Function]
Use to set the 300bps signal send (Max. value).
1: NO SIGNAL
2: 11111
3: 11110
4: 00000
5: 010101
6: 00001
[Operation]
1) Initial display
SELECT SIGNAL
PRESS ,
2) [ / ] or after 2sec
Every time when [ ] key is pressed, the second line is changed in the sequence of No. 1
3 4 5 6 1.
When [ ] key is pressed, the sequence is reversed.
SELECT SIGNAL (1-6)
1:NO SIGNAL
[CLEAR] key: FAX control is terminated.
3) [ENTER] key
OUTPUTING SIGNAL MAX
PRESS CLEAR TO STOP
[CLEAR] key: Returns to "1) Initial display".
[Function]
Use to set the 300bps signal send (Soft SW set value).
1: NO SIGNAL
2: 11111
3: 11110
4: 00000
5: 010101
6: 00001
[Operation]
1) Initial display
SELECT SIGNAL
PRESS ,
2) [ / ] or after 2sec
Every time when [ ] key is pressed, the second line is changed in the sequence of No. 1
3 4 5 6 1.
When [ ] key is pressed, the sequence is reversed.
SELECT SIGNAL (1-6)
1:NO SIGNAL
[CLEAR] key: FAX control is terminated.
3) [ENTER] key
OUTPUTING SIGNAL SSW
PRESS CLEAR TO STOP
[CLEAR] key: Returns to "1) Initial display".
AR-168S/168D TEST COMMAND, TROUBLE CODES 10 - 34
Details of function/operation
..... SELECT SIGNAL (1-6)
6:00001
..... SELECT SIGNAL (1-6)
6:00001
2
2