Cisco 7200 VXR Quick Start Manual page 8

Figure 1 Installing a CompactFlash Disk
1
O R K P R
O C E S S IN
G E N G IN
C O M PA
C T F L A
1
Inserting the CompactFlash Disk
2
Releasing the CompactFlash Disk
Step 1 Turn the CompactFlash Disk so that the label is facing down. It is keyed and cannot be inserted incorrectly.
Step 2 Slide the CompactFlash Disk into the CompactFlash Disk slot.
See the Network Processing Engine and Network Services Engine Installation and Configuration document for more
information about using the NPE-G1 or NPE-G2.
Figure 2 Installing the GBIC in an NPE-G1
2
3 1
1 GBIC
2 Alignment groove
Step 1 Insert the Gigabit Ehternet Gigabit Interface Converter (GBIC) in a GBIC slot on the NPE-G1. The GBIC is keyed so
that it can only be inserted correctly.
Step 2 Repeat Step 1 until the GBICs you ordered are installed.
8
2
O R K P R
O C E S S IN
G E N G IN
E - G 1 E - G 1
C O M PA
C T F L A
S H
3
S H
3
Removing the CompactFlash Disk
3 GBIC slot
4 Plug
3
O R K P R
O C E S S IN
G E N G IN
E - G 1
C O M PA
C T F L A
S H
ETHERNET GIGABIT ETHERNET INPUT/OUTPUT CONTROLLER
4