Cisco 7200 VXR Quick Start Manual page 43

Cisco 7200 vxr routers

Hide thumbs Also See for 7200 VXR:

Table of Contents

Figure 26

Removing the Port Adapter Jacket Card

Cisco 7200

Series VXR

Note

If you have difficulty removing the Port Adapter Jacket Card from the lowest slot of a Cisco 7200 VXR router that is

rack-mounted, remove the port adapters, and processing engine from the chassis., then remove the Port Adapter Jacket

Card.

Step 6

Loosen the captive installation screws found at the top left and right corners of the Port Adapter Jacket Card and, using

the handles on the Port Adapter Jacket Card, pull the Port Adapter Jacket Card from the chassis.

Step 7

Replace the Port Adapter Jacket Card with an I/O controller blank panel or another Port Adapter Jacket Card to ensure

proper airflow through the router.

Step 8

If the Port Adapter Jacket Card has been replaced, insert a port adapter or a port adapter blank panel into the Port

Adapter Jacket Card to ensure proper airflow through the router.

Step 9

Tighten the captive installation screws.

Step 10 If you removed the processing engine or port adapters from the chassis, replace them in a bottom-to-top order.

ETHERNET 10BT

TOKEN RING

ETHERNET-10BFL

PORT ADAPTER JACKET CARD

Table of Contents