Connection Between Sensor And Electronic Unit (Remote Meter Version, Protection Class Ip 68); Operational Start - Omega FMG600 Series User Manual

Design, Assembly and Service Manual
Page 19 of 44
Induction flow meter FMG600 series
6.4. Connection between sensor and electronic unit (remote meter
version, protection class IP 68)
In the IP 68 version of the flow sensor, the terminal box is sealed by cast plastic and the connecting cable is
fixed on the sensor side. On the electronic unit side, the cable is provided with a screw-on connector with its
mating part mounted on the electronic unit bracket. To prevent unauthorised handling, this connector can be
sealed. The hole for the seal wire is provided in the bracket.

6.5. Operational start

6.5.1 Operational start
The induction flow meter of either compact or remote design shall first be fitted mechanically and then the
power supply and output terminals interconnected. Then switch on the power voltage. For a short while, the
meter display will read WELCOME TO OMEGA FMG600 SERIES. Then one of the items of the DISPLAYED
DATA menu will appear.