Deck Belt, Primary Belt And Blade Belt Inspection; Wear Or Damage; Blade Belt Tension - Honda HT-R3811 Owner's Manual

6. Deck belt, primary belt and blade belt inspection
1 Wear or damage
1. Lower the cutter deck as far as it will go with the cutter deck height ad-
justing lever.
2. Inspect both belts for wear and damage. If the belts are worn or damaged,
replace them according to the instructions on pages 47-50.
n Blade belt tension
1. Move the P.T.O. lever to the ON (Engaged) position.
2. Raise the cutter deck as far as it will go with the cutter deck height ad-
justing lever.
3. If the index mark on the tensioner arm aligns with or goes inward past the
wear indicator on the cutter deck, adjust the belt tension according to the
instructions on page 47.
BLADE BELT
PRIMARY BELT
CUTTEd DECK
DECli BELT
INDEX MARK
WEAR INDICATOR
CUTTER DECK
20