Blade Inspection, Sharpening And Replacement - Honda HT-R3811 Owner's Manual

10. Blade inspection, sharpening and replacement
cmml
Never attempt to change a blade while the engine is running.
qemove the ignition key from the ignition and disconnect the spark plug
cap to prevent accidental start up.
CAUTION: Always wear heavy gloves to protect your hands when working
with the cutter blade.
n
Blade inspection
1. Remove the cutter deck from the riding mower (see page 34 thru. 36).
2. Inspect the blade for cracks, bends or signs of wear. If the blade is bent,
damaged or badly worn, replace it.
CAUTION: Use only genuide
Honda replacement blade or their
equivalent.
0
NEW
X
Replace
X
Replace
X
Replace
FLAT PART OF BLADE
LIFT
0
LIFT
WORN OR DAMAGED
If the lift of the blade is worn or
damaged, the mower cannot cut evenly.
If the blade is bent, the mower cuts
unevenly and the blade may interfere
with the cutter deck.