Connecting To A Dvd; Connecting To A D-Tv Set-Top Box - LG CF181D Owner's Manual

Connecting to a DVD

* The output jacks (Y, P , P ) of the DVD might be labeled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment.
B R
< How to connect >
a.Connect the DVD component cable to the Y, P
the COMPONENT IN of the projector.
* When connecting the component cable, match the jack colors
with the component cable.(Y=green, P
b. You may use HDMI instead of component if available on the
DVD player. HDMI supports better quality than component.
Component
Signal
480i O
480p O
O
720p
O
1080i
O
1080p
O
576i
O
576p

Connecting to a D-TV Set-Top Box

* To receive D-TV programs, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to the projector.
* Please refer to the owner's manual of the D-TV Set-Top Box for the connection between the projector and D-TV Set-Top Box.
< How to connect a HDMI source >
a.Connect the HDMI IN of the projector and the HDMI output
port of the DTV set-top box with an HDMI cable.
b.Set the DTV receiver's resolution to one of the following:
480p(576p)/720p/1080i/1080p mode.
< How to connect a Component source >
a.Connect the component cable connected to the DTV set-top box
to the Y, P and P of the COMPONENT IN of the projector.
B R
* When connecting the component cable, match the jack colors.
(Y=green, P =blue, P =red)
B R
and P of
B R
=blue, P =red)
B R
HDMI
X
O
O
O
O
X
O
<DVD>
(R) AUDIO (L)
Component cable
<D-TV Set-Top Box>
HDMI OUTPUT
(R) AUDIO (L) DTV OUTPUT
HDMI Cable
<D-TV Set-Top Box>
(R) AUDIO (L) DTV OUTPUT
Component cable
Connection
Y P B P
R
DVI OUTPUT Y P P
B R
DVI OUTPUT Y P P
B R
19