Turning On The Projector; Turning Off The Projector - LG CF181D Owner's Manual

Installing and Composition

Turning on the Projector

1. Connect power cord correctly.
2. Remove the lens cap. If it is left on, it could become deformed due to the heat produced by the
projection lamp.
3. Press the POWER button on the remote control or back cover.
G An image will appear after the operation deco LED turns (Blue (flashing))(Refer to page 11).
G Press the INPUT button on the remote control or the INPUT button on the control panel to select the input signal you want.
* Do not disconnect the power cord while the suction/discharge fan in operation. If the power cord is disconnected during
the suction/ discharge fan in operation, it may takes longer to activate the lamp after turning on the power and the lifespan
of the lamp may be shortened.

Turning off the Projector

1. Press the POWER button on the back cover or remote control.
2. Press the POWER button on the back cover or remote control again to turn off the power.
3. If the operation indicator is flashing orange, in other words the fan is working (60 seconds), do not
disconnect the projector. When the indicator turns red, you may remove the power cord (Refer to
page 11).
G If the operation indicator LED is orange and flashing, the power button on the back cover or on the remote control will not
operate.
Power off?
Please press Power key again.
16