Table of Contents
Advertisement
APBX IP4G User Manual
Check SIP Trunk Status
4.2
After creating trunk, go to System Status -> Trunk Status to check the SIP trunk Status, make sure it's registered.
Make outbound calls
4.3
Go to PBX Settings -> Outbound Routes, click
Outbound Route Name
A unique label to help you identify the outbound route.
Dial Pattern
A filter for marching numbers you dial, the call will be forwarded out via Selected Trunks only when it matches the
dial pattern here. In patterns, some characters have special meanings.
X means Any Digits from 0-9
Z means Any Digits from 1-9
N means Any Digits from 2-9
[1234-9] means Any Digits in the brackets (in this example, 1, 2, 3, 4, 5, 6, 7, 8, 9)
. means one or more digits
! will match none remaining digits, and causes the matching process to complete as soon as it can be determined that
no other matches are possible.
For example: Once set Dial Pattern: 2XX Strip: 0, that means any calls to 200-299 will be forwarded out.
Please do not simply set it to X., otherwise all telephone numbers with 2 or 2+ digits will be matched, this
outbound route probably affect your interior calls, unless your local extensions is just a single figure.
21
to add an outbound route.
ATCOM TECHNOLOGY CO., LIMITED
Advertisement
Table of Contents
