Storage Configuration - ASROCK X79 Extreme6/GB User Manual

3.4.4 Storage Configuration

SATA Mode
This item is for SATA3_0, SATA3_1 and SATA2_0 to SATA2_3 ports.
Use this to select SATA mode. Configuration options: [IDE Mode], [AHCI
Mode], [RAID Mode] and [Disabled]. The default value is [AHCI Mode].
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE mode
does not have these advantages.
Aggressive Link Power Management
Use this item to configure Aggressive Link Power Management.
ASMedia SATA3 Mode
This item is for SATA3_A0 to SATA3_A2 ports. Use this to select ASMedia
SATA3 mode. Configuration options: [IDE Mode], [AHCI Mode] and [Dis-
abled]. The default value is [AHCI Mode].
ASMedia SATA3 Bootable
Use this to enable or disable Onboard ASMedia SATA3 Option ROM. If
Option ROM is disabled, UEFI cannot use the SATA device to connect to
ASMedia SATA3 controller as Boot Device.
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology) feature. Configuration options: [Disabled] and
[Enabled].
We recommend to use Intel
SATA2_0 to SATA2_3) for your bootable devices. This will minimum
your boot time and get the best performance. But if you still want to
boot from ASMedia SATA3 controller, you can still enable this in UEFI.
®
X79 SATA ports (SATA3_0, SATA3_1 and
87