64-Bit / Vista Tm / Vista Tm 64-Bit; Xp / Xp 64-Bit Without Raid Functions; Installing Windows ® Xp / Xp 64-Bit Without Raid Functions; Functions - ASROCK X79 Extreme6/GB User Manual

After the installation of Windows
manage RAID functions, you are allowed to use both "RAID Installation Guide" and "Intel
Rapid Storage Information" for RAID configuration. Please refer to the document in the
Support CD, "Guide to SATA Hard Disks Installation and RAID Configuration", which is lo-
cated in the folder at the following path: .. \ RAID Installation Guide and the document in
the support CD, "Guide to Intel Rapid Storage", which is located in the folder at the follow-
ing path: .. \ Intel Rapid Storage Information
2.23 Installing Windows
XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.23.1 Installing Windows
If you want to install Windows
HDDs without RAID functions, please follow below steps.
AHCI mode is not supported under Windows
Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE]. (For SATA2_0 to SATA2_3, SATA3_0 and
SATA3_1 ports.)
Set the option "ASMedia SATA3 Mode" to [IDE]. (For SATA3_A0 to SATA3_A2
ports.)
STEP 2: Install Windows
®
7 / 7 64-bit / Vista
If you want to make the USB flash driver disk, please copy above
®
Intel RAID drivers from our Support CD to your USB flash, and
then load drivers from the USB flash disk.
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®

XP / XP 64-bit Without RAID Functions

®
XP / XP 64-bit OS on your SATA / SATA2 / SATA3
Advanced screen
®
XP / XP 64-bit OS on your system.
TM TM
/ Vista 64-bit OS, if you want to
TM
/ Vista
TM TM
/ Vista 64-bit / XP / XP 64-
®
XP / XP 64-bit.
Storage Configuration.
67
TM
64-bit / XP /