L2Tp - Edimax BR-6228nC User Manual

3-2-5 L2TP

If your ISP requires you to use L2TP (Layer-2 Tunneling Protocol) to establish connection, you
can select this connection type to establish Internet connection. L2TP is another popular
connection method for xDSL and other Internet connection types, and all required setting
items are the same with PPTP connection.
Like PPTP, there are two kinds of required setting, we ll start from WAN Interface Settings :
Please select the type of how you obtain IP address from your service provider here. You can
choose Obtain an IP address automatically (equal to DHCP, please refer to Dynamic IP
section above), or Use the following IP address (equal to static IP address, please refer to
PPPoE section above).
WAN interface settings must be correctly set, or the Internet connection will fail even those
settings of L2TP settings are correct. Please contact your Internet service provider if you
don t know what you should fill in these fields.
Now please go to L2TP settings section: