Serial Port Settings - D-Link DES-3326SR Manual

Serial Port Settings

The Serial Port Settings window allows the configuration of the switch's serial port.
Click on the Serial Port Settings link from the Basic Setup folder.
The following fields can then be set for the serial port:
Parameter
Baud Rate
Data Bits
Stop Bits
Auto-Logout
D-Link DES-3326SR Layer 3 Switch
Figure 5- 4. Serial Port Settings
Description
Set the serial bit rate used to communicate with a management station. The
console baud rate is 9600 bits per second.
Displays the number of bits that make up a word when communicating with
the management station. The console interface uses 8 data bits.
Displays the number of bits used to indicate that a word has been completely
transmitted. The console interface uses 1 stop bit.
This sets the time the interface can be idle before the switch automatically
logs-out the user. The options are 2 mins, 5 mins, 10 mins, 15 mins, or
Never.
47