Ip Multicast Forwarding Table; 802.1X Authentication Status - D-Link DES-3326SR Manual

IP Multicast Forwarding Table

To browse the IP Multicast Forwarding table, open the Network Monitoring folder and the Status subdirectory.
Click on the IP Multicast Forwarding Table link to see the following menu:
Specify the Multicast Group IP address, Source IP address and Mask, and click on the Find button. The
following Multicast Forwarding information is displayed:
Parameter
Multicast Group
Source IP Address
Source Mask
Upstream Neighbor
Expire Time
Protocol

802.1X Authentication Status

The 802.1X Authentication Status window displays if 802.1X is enabled or disabled. It can be globally enabled
with the 802.1X State menu located in the 802.1X subdirectory of the Advanced Setup folder. The default
settings for 802.1X Authentication is disabled.
D-Link DES-3326SR Layer 3 Switch
Figure 16- 20. IP Multicast Forwarding Table
Description
The IP address of the multicast group.
The IP address of the multicast source.
The subnet mask corresponding to the IP address above.
The IP address of the next router on the path from the switch to the multicast
source.
The number of hops (routers) the packets are allowed to cross.
The routing protocol in use.
Figure 16- 21. 802.1X Status
123