Chevrolet Spark EV 2014 Owner's Manual page 259

3. Turn the bulb socket (3)
counterclockwise and pull it out
of the lamp assembly.
4. Pull the bulb (2) straight out of
the socket.
5. Push the new bulb into the
socket.
6. Install the bulb socket (3) by
turning clockwise into the license
plate lamp assembly.
7. Replace the license plate lamp
assembly by using the two
screws to secure.
Back-Up Lamps
Front Turn Signal/
Parking Lamps
High/Low-Beam
Headlamp
License
Plate Lamp
Rear Turn Signal/
Taillamps
Stoplamp/
Taillamps
For replacement bulbs not listed
here, contact your dealer.
921
The vehicle has fuses and circuit
7444NA
breakers to protect against an
electrical system overload.
H13
When the current electrical load is
too heavy, the circuit breaker opens
W5W LL
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed. This
7443 LL
greatly reduces the chance of circuit
overload and fire caused by
7443 LL
electrical problems.
Fuses and circuit breakers protect
power devices in the vehicle.