Chevrolet Spark EV 2014 Owner's Manual page 258

1. Stoplamp/Taillamp
2. Turn Signal Lamp/Taillamp
3. Back-up Lamp
To replace a taillamp, turn signal
lamp, stoplamp, or back-up bulb:
1. Open the liftgate. See
.
2. Remove the two screws and the
lamp assembly.
3. Turn the bulb socket
counterclockwise and remove
the socket.
4. Press the bulb in and turn
counterclockwise to remove it
from the socket.
5. Press the new bulb in and turn
clockwise to install the bulb into
the socket.
6. Turn the bulb socket clockwise
to reinstall.
7. Reinstall the lamp assembly and
two screws.
1. Attachment Screws
2. License Plate Bulb
3. Bulb Socket
To replace a license plate
lamp bulb:
1. Remove the two screws (1) from
the license plate lamp assembly.
2. Turn and pull the license plate
lamp assembly down.