Page 241 Brake Fluid ....10-11 Battery ..... 10-13 Tires .
Page 242: Table Of Contents
If a Tire Goes Flat ..10-47 cause cancer and birth defects or Tire Sealant and other reproductive harm. Engine For service and parts needs, visit Compressor Kit ... 10-49 exhaust, many parts and systems, your dealer.
Page 243 handling, emissions systems, aerodynamics, durability, and electronic systems like antilock High voltage components are brakes, traction control, and stability identified by labels. Do not control. These accessories or remove, open, take apart, modifications could even cause or modify these components. malfunction or damage not covered High voltage cable or wiring has by the vehicle warranty.
Page 244 If doing some of your own service work, use the proper service To open the hood: manual. It tells you much more about how to service the vehicle than this manual can. To order the proper service manual, see This vehicle has an airbag system. Before attempting to do your own service work, see 2.
Page 245 Remove the hood prop from the prop holder in the rear passenger side of the underhood compartment and secure it to the retainer on the underside of the hood. The prop rod must click into place when returning it to the retainer to prevent hood damage.
Page 247 1. Windshield Washer Fluid The high voltage battery cooling Reservoir. See system reservoir has a tamper resistant cap. The high voltage battery coolant should only be During vehicle operation and also 2. High Voltage Battery Coolant serviced by a qualified technician. during charging, the high voltage Reservoir.
Page 248 The TPIM, APM, and charger The TPIM, APM, and charger modules in the vehicle are kept module coolant reservoir is in the below a maximum temperature. underhood compartment. See If the temperature rises above this temperature, the electric cooling fan will turn on and cool the coolant until the correct temperature is reached.
Page 249 The TPIM, APM, and charger Check to see if coolant is visible module coolant should only be in the heater coolant reservoir. The vehicle must be on a level serviced by a qualified technician. If coolant is visible but the coolant surface when checking the coolant level is below the cold fill line, there level.
Page 250 to freeze and damage the The brake wear warning sound washer fluid tank and other means that soon the brakes will parts of the washer system. not work well. That could lead to a crash. When the brake wear When using concentrated warning sound is heard, have the washer fluid, follow the vehicle serviced.
Page 251 Properly torqued wheel nuts are necessary to help prevent brake The braking system on a vehicle is pulsation. When tires are rotated, complex. Its many parts have to be inspect brake pads for wear and of top quality and work well together evenly tighten wheel nuts in the if the vehicle is to have really good proper sequence to torque...
Page 252 A fluid leak in the brake After work is done on the brake hydraulic system can also cause hydraulic system, make sure the a low fluid level. Have the brake level is above MIN but not over the With the wrong kind of fluid in the hydraulic system fixed, since a MAX mark.
Page 253 See If a Crash Occurs under Propulsion power may be reduced in extremely cold temperatures, or if for additional information. the high voltage battery is too cold. If brake fluid is spilled on the If an airbag has inflated, see BATTERY TOO COLD, PLUG IN vehicle's painted surfaces, TO WARM will display.
Page 254 Discharge the high voltage battery until two or three bars Battery posts, terminals, and charger must be used, with the remain on the battery range related accessories contain lead appropriate setting selected. indicator (Battery symbol) on the and lead compounds, chemicals Follow the trickle charger instrument cluster.
Page 255 5. After the cable has been connected, open the hatch and then tighten the cable. Allowing the wiper arm to touch After the battery cable is the windshield when no wiper reconnected, it is possible that the blade is installed could damage vehicle may not operate.
Page 256 Headlamp aim has been preset and For the proper type of replacement should need no further adjustment. bulbs, see If the vehicle is damaged in a crash, the headlamp aim may be affected. For any bulb changing procedure If adjustment to the headlamps is not listed in this section, contact necessary, see your dealer.
Page 257 2. Remove the connector retaining tab (1). 3. Disconnect the wiring harness connector from the bulb (3) by pressing the connector release (2) and pulling straight back. 4. Remove the bulb (3) from the headlamp assembly by turning counterclockwise and pulling straight back.
Page 258 7. Reinstall the lamp assembly and two screws. 2. Remove the two screws and the lamp assembly. 3. Turn the bulb socket counterclockwise and remove the socket. 1. Stoplamp/Taillamp 1. Attachment Screws 4. Press the bulb in and turn 2. Turn Signal Lamp/Taillamp 2.
Page 259 3. Turn the bulb socket (3) counterclockwise and pull it out of the lamp assembly. 4. Pull the bulb (2) straight out of Back-Up Lamps the socket. The vehicle has fuses and circuit Front Turn Signal/ 7444NA 5. Push the new bulb into the breakers to protect against an Parking Lamps socket.
Page 260 Replace a bad fuse with a new one of the identical size and rating. If the wiper motor overheats due to If there is a problem on the road and heavy snow or ice, the windshield The wiring circuits in the vehicle are a fuse needs to be replaced, the wipers will stop until the motor cools protected from short circuits by a...
Page 261 Spilling liquid on any electrical component on the vehicle may damage it. Always keep the covers on any electrical component. To access the fuses, press the tab at the back of the cover, and lift the cover. The underhood compartment fuse block is on the driver side of the vehicle, near the battery.
Page 263 The vehicle may not be equipped with all of the fuses, relays, and Auxiliary Heater Front Washer features shown. Pump Fuse Relay ACCM Fuse Antilock Brake TPIM1 Fuse System Oil HPCC Fuse Engine Control Feeding Fuse Module Fuse Wash Fuse OBCM Fuse Not Used PE Coolant...
Page 264 Not Used Front Wiper Aero Shutter Fuse Control Relay HLLD Fuse Electric Parking Front Wiper Fuse Brake Fuse Front Wiper Speed VICM Fuse Relay Passive Entry/ Passive Start Fuse Electronic Brake Not Used Control Rear Defogger Not Used Module Fuse Relay Not Used Engine Control...
Page 265 Open the fuse panel door by pulling Remove the fuse panel door out at the top. diagonally. The instrument panel fuse block is on the underside of the driver side Spilling liquid on any electrical instrument panel. component on the vehicle may damage it.
Page 266 Steering Wheel Not Used Controls Not Used Backlighting Heater, Ventilation, Not Used and Air Conditioning Body Control Switch Module 1 Heated Seat Body Control Module 2 Not Used Body Control Not Used Module 3 Body Control Body Control Module 4 Module 6 Body Control Body Control...
Page 267 Accessory/ Outside Rearview Mirror Retained Accessory Power Every new GM vehicle has Spare Fuse Relay high-quality tires made by a Headlamp Leveling leading tire manufacturer. See Not Used Ultrasonic Park the warranty manual for Radio Assist information regarding the tire Heater, Ventilation, warranty and where to get Instrument Cluster...
Page 268 Poorly maintained and Overinflated tires are more Improperly repaired tires improperly used tires are likely to be cut, punctured, can cause a crash. dangerous. or broken by a sudden Only the dealer or an impact such as when Overloading the tires can authorized tire service hitting a pothole.
Page 269 Use only radial ply tires of the same size, load range, and This vehicle was not originally Useful information about a tire is speed rating as the original equipped with winter tires. Winter equipment tires. molded into its sidewall. The tires are designed for increased examples show a typical Winter tires with the same speed...
Page 270 The type The last four of cord and number of plies in Original digits of the TIN indicate the the sidewall and under the tread. equipment tires designed to tire manufactured date. The GM's specific tire performance first two digits represent the Tire criteria have a TPC specification week (01-52) and the last...
Page 271 A two-digit is certified to carry. The speed number that indicates the tire rating is the maximum speed a height-to-width measurements. tire is certified to carry a load. For example, if the tire size The following is an example of aspect ratio is 60, as shown in a typical passenger vehicle item 3 of the illustration, it would...
Page 272 A rubber coated layer of maximum capacity of fuel, oil, Gross Axle Weight cords that is located between and coolant, but without Rating for the rear axle. See the plies and the tread. Cords passengers and cargo. may be made from steel or other A code molded reinforcing materials.
Page 273 model name molding that is The portion of a tire load rating for a tire at the higher or deeper than the same between the tread and the bead. maximum permissible inflation moldings on the other sidewall pressure for that tire. of the tire.
Page 274 A tire Load on an individual tire information system that provides due to curb weight, accessory Neither tire underinflation consumers with ratings for a weight, occupant weight, and nor overinflation is good. tire's traction, temperature, cargo weight. Underinflated tires, or tires and treadwear.
Page 275 The Tire and Loading If the inflation pressure is low, Information label on the add air until the recommended Use a good quality pocket-type vehicle indicates the original pressure is reached. If the gauge to check the tire equipment tires and the correct inflation pressure in high, press pressure.
Page 276 Each tire, including the spare (if tread life, and may affect the pressure as intended. TPMS provided), should be checked vehicle's handling and stopping malfunctions may occur for a variety monthly when cold and inflated to ability. of reasons, including the installation the inflation pressure recommended of replacement or alternate tires or Please note that the TPMS is...
Page 277 and wheel assembly. The TPMS The low tire pressure warning light sensors monitor the air pressure in may come on in cool weather when the tires and transmit the tire the vehicle is first started, and then Tire sealant materials are not all pressure readings to a receiver turn off as the vehicle is driven.
Page 278 rotating the tires. The If the TPMS is not functioning malfunction light should go off properly, it cannot detect or signal a The TPMS will not function properly after successfully completing the low tire condition. See your dealer if one or more of the TPMS sensors sensor matching process.
Page 279 There are two minutes to match 6. Use the SELECT knob to select 11. Proceed to the driver side rear the first tire/wheel position, and YES with the highlighted tire, and repeat the procedure five minutes overall to match all selection, and press the in Step 8.
Page 280 Replace the tire if: position it is in. Directional tires will have an arrow on the tire The indicators at three or If the vehicle has non-directional indicating the proper direction of more places around the tire tires, they should be rotated rotation or will have left or can be seen.
Page 281 Adjust the front and rear tires to the recommended inflation pressure on the Tire and off and cause an accident. When Factors such as maintenance, Loading Information label after changing a wheel, remove any temperatures, driving speeds, the tires have been rotated. See rust or dirt from places where the vehicle loading, and road conditions wheel attaches to the vehicle.
Page 282 The rubber in tires ages over time. slow aging. This area should be GM's exclusive TPC Spec This also applies to the spare tire, free of grease, gasoline, or other system considers over a if the vehicle has one, even if it is substances that can deteriorate dozen critical specifications that never used.
Page 283 If proper rotation and maintenance have been done, all four tires should wear out at Only your dealer or authorized A tire and/or wheel could fail about the same time. See tire service center should suddenly and cause a crash. mount or dismount the tires.
Page 284 The Tire and Loading Information Label indicates the original equipment tires on the If different sized wheels are used, Quality grades can be found vehicle. See there may not be an acceptable where applicable on the tire , for the label level of performance and safety sidewall between tread shoulder location and more information...
Page 285 nominal rim diameters of For example, a tire graded Warning: The traction grade 10 to 12 inches (25 to 30 cm), 150 would wear one and assigned to this tire is based on or to some limited-production one-half (1½) times as well straight-ahead braking traction tires.
Page 286 The grade C corresponds to a basis. Consider an alignment check Each new wheel should have the if there is unusual tire wear or the same load-carrying capacity, level of performance which all vehicle is significantly pulling to one diameter, width, offset, and be passenger car tires must meet side or the other.
Page 287 This vehicle has a tire sealant and The wrong wheel can also cause compressor kit. See problems with bearing life, brake Do not use tire chains. There is cooling, speedometer or There is no spare tire, no tire not enough clearance. Tire chains changing equipment, and no place odometer calibration, headlamp used on a vehicle without the...
Page 288: If A Tire Goes Flat
A rear blowout, particularly on a 2. Park the vehicle. Set the parking curve, acts much like a skid and brake firmly and put the shift may require the same correction as lever in P (Park). See Lifting a vehicle and getting used in a skid.
Page 289 Read and follow all of the tire sealant and compressor kit instructions. strike someone. Store the tire The kit includes: sealant and compressor kit in its original location. Overinflating a tire could cause the tire to rupture and you or If this vehicle has a tire sealant and others could be injured.
Page 290 Check the tire sealant expiration If a tire goes flat, avoid further tire date on the tire sealant canister. and wheel damage by driving slowly The tire sealant canister (4) should to a level place. Turn on the hazard be replaced before its expiration warning flashers.
Page 291 4. Attach the air only hose (10) to 5. Slide the base of the tire sealant 7. Attach the sealant/air hose (2) to the sealant canister inlet canister (3) into the slot on the the tire valve stem by turning it valve (1) by turning it clockwise top of the compressor (6) to hold clockwise until tight.
Page 292: Tire Sealant And Compressor Kit
If the vehicle only has a cigarette 11. Inflate the tire to the lighter, use the cigarette lighter. recommended inflation pressure using the pressure Do not pinch the power plug tire. Remove the power plug from gauge (7). The recommended cord in the door or window.
Page 293 14. Turn the sealant/air hose (2) 23. Stop at a safe location and counterclockwise to remove it check the tire pressure. Refer from the tire valve stem. to Steps 1 10 under Using the Tire Sealant and Compressor 15. Replace the tire valve Kit without Sealant to Inflate a stem cap.
Page 294 24. Wipe off any sealant from the 5. On/Off Button wheel, tire, or vehicle. 6. Slot on Top of Compressor 25. Dispose of the used tire 7. Pressure Gauge sealant canister (4) at a local dealer or in accordance with The kit includes: local state codes and practices.
Page 295 6. Plug the power plug (9) into the 9. Inflate the tire to the for other important accessory power outlet in the recommended inflation pressure safety warnings. vehicle. Unplug all items from using the pressure gauge (7). other accessory power outlets. The recommended inflation 1.
Page 296 11. Unplug the power plug (9) from the accessory power outlet in the vehicle. If the recommended pressure The tire sealant and compressor kit 12. Turn the air only hose (10) cannot be reached after is located in the rear storage area. counterclockwise to remove it approximately 25 minutes, the from the tire valve stem.
Page 297 3. Good Battery Negative Terminal 4. Good Battery Positive Terminal For more information about the Ignoring these steps could result The jump start negative grounding vehicle battery, see in costly damage to the vehicle point (1) is a stud on a bracket that would not be covered by the located to the right of the Traction If the 12 volt battery has run down,...
Page 298 4. Turn the ignition to LOCK/OFF. Turn off all lights and accessories in both vehicles, If the other vehicle does not have Be sure the battery has enough except the hazard warning a 12-volt system with a negative water. You do not need to add flashers if needed.
Page 299 9. Start the engine in the vehicle with the good battery and run the engine at idle speed for at Fans or other moving propulsion least four minutes. system parts can injure you badly. 10. Try to start the vehicle that had Incorrectly towing a disabled Keep your hands away from the dead battery.
Page 300: Towing The Vehicle
Is the vehicle ready to be Carefully open the cover by using vehicle with all four wheels on the towed? Just as preparing the the small notch that conceals the ground. Dolly towing is towing the vehicle for a long trip, make sure tow eye socket.
Page 301 be covered by the vehicle warranty. Do not tow the vehicle with all four wheels on the ground. The vehicle was not designed to be towed with all four wheels on the ground. If the vehicle must be towed, a dolly should be used. See Dolly Towing following.
Page 302 symbol is on any underhood compartment electrical center that should not be power products can be obtained washed. This could cause damage from your dealer. Follow all that would not be covered by the manufacturer directions regarding vehicle warranty. correct product usage, necessary Locks are lubricated at the factory.
Page 303 The bright metal moldings on the vehicle are aluminum. To prevent Application of aftermarket clearcoat damage always follow these sealant/wax materials is not Machine compounding or cleaning instructions: recommended. If painted surfaces aggressive polishing on a Be sure the molding is cool to are damaged, see your dealer to basecoat/clearcoat paint finish the touch before applying any...
Page 304 Replace the wiper blades if they are worn or damaged. Damage can be caused by extreme dusty Use only lukewarm or cold water, a Using petroleum-based tire conditions, sand, salt, heat, sun, soft cloth, and a car washing soap dressing products on the vehicle snow, and ice.
Page 305 washing system can do this. If not removed, rust and corrosion can develop. or sodium chloride. These Visually inspect the front and rear suspension and steering system for chlorides are used on roads for damaged, loose, or missing parts or conditions such as ice and dust.
Page 306 Never use a brush with stiff Your dealer may have products for bristles. cleaning the interior. Use cleaners Airborne pollutants can fall upon specifically designed for the Never rub any surface and attack painted vehicle surfaces surfaces being cleaned to prevent aggressively or with excessive causing blotchy, ring-shaped permanent damage.
Page 307 3. Start on the outside edge of the soil and gently rub toward the Start by vacuuming the surface center. Fold the cleaning cloth using a soft brush attachment. If a To prevent scratching, never use to a clean area frequently to rotating brush attachment is being abrasive cleaners on automotive prevent forcing the soil in to the...
Page 308 change the appearance and feel of leather or soft trim and are not For vehicles with high gloss Use a soft microfiber cloth surfaces or vehicle displays, use a dampened with water to remove recommended. microfiber cloth to wipe surfaces. dust and loose dirt.
Page 309 that GM certified floor mats be purchased. Non-GM floor mats may not fit properly and may Wash with warm water and mild interfere with the pedals. Always detergent. Do not use chlorine check that the floor mats do not If a floor mat is the wrong size or bleach.
Page 310 Pull up on the rear of the floor mat to unlock each retainer and remove. Reinstall by lining up the floor mat retainer openings over the carpet retainers and snap into position. Make sure the floor mat is properly secured in place. Verify the floor mat does not interfere with the pedals.
Page 325 Reporting Safety Defects to Procedure ....13-1 Chevrolet. Normally, any concerns General Motors ... 13-13...
Page 326 If after contacting a When contacting Chevrolet, 40 days. If you do not agree with the member of dealership management, remember that your concern will decision given in your case, you it appears your concern cannot be likely be resolved at a dealer's...
Page 327 Two, General Motors of Canada Centre, 1-800-263-3777 (English), assistance. However, if a customer Limited wants you to be aware of its 1-800-263-7854 (French), wishes to write or e-mail Chevrolet, participation in a no-charge or write to: the letter should be addressed to: Mediation/Arbitration Program.
Page 328 Assistance Center. Any TTY user View in the U.S. can communicate printable dealer-recorded service General Motors of Canada Limited with Chevrolet by dialing: records and self-recorded service Customer Care Centre, 1-800-833-2438. TTY users in records. Mail Code: CA1-163-005 Canada can dial 1-800-263-3830.
Page 329 General Motors of Canada also has a Mobility Program. Visit www.gm.ca or call 1-800-GM-DRIVE Take a trip to the Chevrolet Owner (463-7483) for details. TTY users Centre: call 1-800-263-3830. Chat live with online help representatives. Use the Vehicle Tools section.
Page 330 New Vehicle Limited Warranty. Tow to the chains, or other traction devices. Chevrolet and General Motors of nearest Chevrolet dealer for Canada Limited reserve the right to Towing or services for vehicles warranty service, or if the vehicle...
Page 331 Mechanical failures may be If your dealer requests you to bring covered, however any cost for the vehicle for service, you are parts and labor for repairs not urged to do so as early in the work Vehicle covered by the warranty are the day as possible to allow for registration is required.
Page 332 Courtesy Transportation is not a one-way or round-trip shuttle service part of the New Vehicle Limited within reasonable time and distance Your dealer may arrange to provide Warranty. A separate booklet parameters of your dealer's area. you with a courtesy rental vehicle or entitled Limited Warranty and reimburse you for a rental vehicle Owner Assistance Information...
Page 333 parts. Poorly performed collision A recycled original equipment GM repairs diminish the vehicle resale part may be an acceptable choice to value, and safety performance can maintain the vehicle's originally All program options, such as shuttle be compromised in subsequent designed appearance and safety service, may not be available at collisions.
Page 334 When purchasing insurance, we Give only the necessary information recommend that you ensure that the to police and other parties involved GM also recommends that you vehicle will be repaired with GM in the crash. choose a collision repair facility that original equipment collision parts.
Page 335 Choose a reputable repair facility Specify to the facility that any In such cases, you can have control that uses quality replacement parts. required replacement collision parts of the repair and parts choices as See Collision Parts earlier in this be original equipment parts, either long as the cost stays within section.
Page 336 Owner publications are written Technical Service Bulletins and specifically for owners and intended Manuals are available for current to provide basic operational and past model GM vehicles. information about the vehicle. The Owner Manual includes the Maintenance Schedule for all models.
Page 337 Transport Canada Call 1-800-222-1020, or write: Administrator, NHTSA immediately, and notify General Chevrolet Motor Division 1200 New Jersey Avenue, S.E. Motors of Canada Limited. Chevrolet Customer Assistance Washington, D.C. 20590 Call Transport Canada at...
Page 338 These data can help provide a better understanding of the This vehicle is equipped with an circumstances in which crashes and event data recorder (EDR). The injuries occur. NOTE: EDR data are main purpose of an EDR is to recorded by your vehicle only if a record, in certain crash or near non-trivial crash situation occurs;...
Page 339 GM will not access this data or use of the vehicle and its features; share it with others except: with the and, in certain situations, the consent of the vehicle owner or, location and approximate GPS if the vehicle is leased, with the speed of the vehicle.
Page 341 Press Make a call, end a call, or answer an incoming call. Give OnStar Hands-Free Calling OnStar Overview ... . 14-1 voice commands. Give OnStar Turn-by-Turn Emergency ....14-2 Navigation voice commands.
Page 342 Press the OnStar Emergency button to get a priority OnStar navigation requires the connection to an Emergency Directions and Connections Advisor available 24/7 to: service plan. With Automatic Crash Response, Get help for an emergency. the built-in system can automatically Press to receive directions or Be a Good Samaritan or...
Page 343 2. Say Repeat. System responds After the call ends, press the Go with the last direction given, then button on the navigation screen to responds with OnStar ready, begin driving directions. then a tone. If directions are downloaded to the 1.
Page 344 Download the OnStar RemoteLink 1. Press . System responds: ® mobile app to select Apple OnStar Ready, followed by 1. Press . System responds: ® Android , and BlackBerry devices a tone. OnStar ready. to check vehicle fuel level, oil life, 2.
Page 345 Automatic Crash Response, Press and say Minutes then Emergency Services, Crisis Assist, Verify to check how many minutes Stolen Vehicle Assistance, Vehicle remain and their expiration date. Diagnostics, Remote Door Unlock, Press to request account transfer Roadside Assistance, Turn-by-Turn eligibility information. The Advisor Navigation, and Hands-Free Calling OnStar Vehicle Diagnostics will can assist in canceling or removing...
Page 346 OnStar services require a vehicle service such as hills, tall buildings, The available dealer-installed TTY electrical system, wireless service, tunnels, weather, electrical system system can provide in-vehicle and GPS satellite technologies to be design and architecture of the access to all of the OnStar services, available and operating for features vehicle, damage to the vehicle in a except Virtual Advisor and OnStar...
Page 347 To change the OnStar PIN, call Roadside Assistance and a route or may ask for a call back OnStar and provide the Advisor with locksmith to help gain access to the after the vehicle is driven into an the current number. vehicle.
Page 348 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES The OnStar system is integrated OF MERCHANTABILITY, FITNESS into the electrical architecture of the Certain OnStar components include FOR A PARTICULAR PURPOSE vehicle. Do not add any electrical libcurl and unzip software. Below AND NONINFRINGEMENT OF equipment.
Page 349 Dave Smith, Steven M. Schweda, 2. Redistributions in binary form Christian Spieler, Cosmin Truta, (compiled executables) must This is version 2005-Feb-10 of the Antoine Verheijen, Paul von Behren, reproduce the above copyright Info-ZIP copyright and license. Rich Wales, Mike White notice, definition, disclaimer, The definitive version of this and this list of conditions in...
Page 350 3. Altered versions including, but 4. Info-ZIP retains the right to use not limited to, ports to new the names Info-ZIP, Zip, operating systems, existing ports UnZip, UnZipSFX, WiZ, with new graphical interfaces, Pocket UnZip, Pocket Zip, and dynamic, shared, or static and MacZip for its own source library versions must be plainly and binary releases.

Chevrolet Spark EV 2014 Owner's Manual

Quick Links

Related Manuals for Chevrolet Spark EV 2014

Summary of Contents for Chevrolet Spark EV 2014

Page 242: Table Of Contents

Page 288: If A Tire Goes Flat

Page 292: Tire Sealant And Compressor Kit

Page 300: Towing The Vehicle