Chevrolet Spark EV 2014 Owner's Manual page 255

5. After the cable has been
connected, open the hatch and
then tighten the cable.
After the battery cable is
reconnected, it is possible that the
vehicle may not operate. If this
happens, the high voltage battery
may need to be charged.
Windshield wiper blades should be
inspected for wear or cracking. See
.
Replacement blades come in
different types and are removed
in different ways. For proper
windshield wiper blade length
and type, see
Allowing the wiper arm to touch
the windshield when no wiper
blade is installed could damage
the windshield. Any damage that
occurs would not be covered by
your warranty. Do not allow the
wiper arm to touch the windshield.
To replace the windshield wiper
blade:
1. Pull the windshield wiper
assembly away from the
windshield.
.
2. Press the button (2) in the
middle of the wiper arm
connector, and pull the wiper
blade away from the arm
connector (1).
3. Remove the wiper blade.
4. Reverse Steps 1 3 for wiper
blade replacement.