Sony DNW-7 Maintenance Manual page 73

Hide thumbs Also See for DNW-7:
Table of Contents

Advertisement

LCD Display (factory setting)
DIAG 6-6
VTR MODE SEL-6
66 00000
1 2 3 4 5
DIAG 6-7
VTR MODE SEL-7
67 00
1 2
DNW-7/90/90WS
Description
1. LTC UBIT : Sets the data recorded in the user bits of LTC.
0 : Fixed data (Conventional-type user bits)
1 : Time of internal timer (in real time)
2 : Shot data
2. LTC UB-MARKER : Sets whether to write the mark below in the user bits of LTC.
REC start mark
Shot mark 1
Shot mark 2
0 : Conform to the menu setting below.
1 : Writes all marks.
2 : Writes nothing.
3. REC START MARKER
(Valid when the LTC UB-maker is set to SW.)
0 : Writes.
1 : Not write.
4. SHOT MARKER 1
(Valid when the LTC UB-marker is set to SW.)
0 : Writes.
1 : Not write.
5. SHOT MARKER 2
(Valid when the LTC UB-marker is set to SW.)
0 : Writes.
1 : Not write.
1. VITC UBIT : Sets the data recorded in the user bits of VITC.
0 : Fixed data (Conventional-type user bits)
1 : Time of internal timer (in real time)
2 : Shot data
2. SHOT DATA : Sets the data length of the VITC shot data.
0 : Record data of date, time, model ID, serial No., cassette No., shot No.
1 : Record data of date, time, model ID, serial No., cassette No., shot No.,
shot ID 1 to 4.
3-2. DIAG Memu
3-29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents