Sony DNW-7 Maintenance Manual page 53

Viewfinder screen (Factory default setting)
* LEVEL 6 *
R BLACK : 0
G BLACK : 0
B BLACK : 0
R GAMMA : 0
G GAMMA : 0
B GAMMA : 0
BLACK STRETCH : 2
TEST OUT : ENC
* LEVEL 7 *
R FLARE : 0
G FLARE : 0
B FLARE : 0
FLARE : ON
TEST OUT : ENC
* LEVEL 8 *
MATRIX TABLE : A
: B (for PAL)
R-G : 0
R-B : 0
G-R : 0
G-B : 0
B-R : 0
B-G : 0
MATRIX : OFF
: ON (for PAL )
DNW-7/90/90WS
Description
........... Sets the R/G/B black level.
........... Sets the R/G/B gamma correction curve.
........... Stretch or compress the black gain.
........... Sets the type of the video signal output from the TEST OUT connector.
n
Same as TEST OUT item of the "FUNCTION 1/2" page.
........... Sets the R/G/B flare correction amount.
........... Sets whether to activate the flare correction function.
........... Sets the type of the video signal output from the TEST OUT connector.
n
Same as TEST OUT item of the "FUNCTION 1/2" page.
........... Selects the matrix setting.
When shipped from the factory, the same matrix is assigned for both A and B.
The matrix coefficient can be freely changed to obtain a customers' desired
color reproducibility.
........... Sets the matrix coefficient.
........... Sets whether to activate the linear matrix circuit.
n
Same as MATRIX item of the "FUNCTION 1/2" page.
3-1. Setup Menu
3-9