Ap Array - D-Link AirPremier N DAP-2310 User Manual

Section 3 - Configuration
An AP array is a set of devices on a network that are organized into a single group to increase ease of management.
Enable Array:
This check box allows the user to enable the AP
array function. The three modes that are available
are Master, Backup Master, and Slave. APs in the
same array will use the same configuration. The
configuration will sync the Master AP to the Slave
AP and the Backup Master AP when a Slave AP
and a Backup Master AP join the AP array.
AP Array Name:
Enter a name for the AP array you have created.

AP Array

Enter a password that will be used to access the
Password:
AP array you have created.
Scan AP Array
Click this button to initiate a scan of all the
List:
available APs currently on the network.
AP Array List:
This table displays the current AP array status for
the following parameters: Array Name, Master
IP, MAC, Master, Backup Master, Slave, and Total.
Current Array
This table displays all the current array members.
Members:
The DAP-2310 AP array feature supports up to
eight AP array members.
D-Link DAP-2310 User Manual
AP Array
46