Unpacking
Open the shipping carton of the Switch and carefully unpack its
contents. The carton should contain the following items:
One DES-1016R+ or DES-1024R+ 10/100 Fast Ethernet Switch
One AC power cord
This User's Guide
Four rubber feet with adhesive backing
Screws and two L-type brackets for rack mounting
If any item is found missing or damaged, please contact your local
D-Link reseller for replacement.
Setup
The setup of the Switch can be performed using the following steps:
The surface must support at least 3 kg for the Switch.
The power outlet should be within 1.82 meters (6 feet) of the
device.
Visually inspect the power cord and see that it is fully secured to
the AC power connector.
Make sure that there is proper heat dissipation from and
adequate ventilation around the Switch. Do not place heavy
objects on the Switch.
10/100 Fast Ethernet Switch User's Guide
1
U
NPACKING AND
3
2
S
ETUP