Technics SA-DX750 Operating Instructions Manual page 21

TAPE MONITOR
You cannot record a source connected through a digital terminal
When recording CD, DVD, or TV, ensure the source is connected
through the corresponding analog terminals (+ pages 6 and 7) and
"ANALOG" input is selected (* page 17)
You can record to a tape deck connected to TAPE REC (OUT) or to
a VCR connected to VCR OUT
See the recording units operating instructions for details on how to
prepare it for recording
When recording with a tape deck, you can record any source
except TAPE
When recording with a VCR, you can record any source except
TAPE or VCR
1
Turn [INPUT SELECTOR] to select the
source to be recorded.
2 Begin recording.
Follow your recording units operating instructions
3 Begin the source to be recorded.
Follow your equipments operating instructions
To monitor sound being recorded onto a tape deck
It is possible to check the sound being recorded if your tape deck is
a 3 head system
Press [TAPE MONITOR] on this unit and
set the monitor button on the tape deck to
"TAPE".
Press [TAPE MONITOR] once again to turn it off
The
If you make a mistake in operation or if sound output stops, the
HELP function displays information that indicates how you can
remedy the situation
If "ERROR" or scrolling characters ("SPEAKER OFF NOW", for
example) appear on the display, do the following
Press [-HELP, -RESET].
The remedy for the situation is displayed
For your reference
You can reset the units settings to the factory settings If this is ever
necessary, press and hold [-HELP, -RESET] for about 2 seconds
until "RESET" is displayed
This will not erase radio stations you have preset