Technics SA-DX750 Operating Instructions Manual page 20

,,,,, . . ,,
%
\
,,
C-J
\I, '
t&J :
,I\
c I?
f
8
. .
21
vCHA-
The radio
Choose either automatic presetting, which presets the stations the
tuner can receive, or manual presetting, which allows you to select
the stations to preset and the order in which they are to be preset
There are 30 channels available for presetting
Remember
If a new station is preset into a channel, the old station is erased
Presetting FM stations
Preparation Tune to the FM frequency where you want to begin
presetting (+ page 20)
Press and hold [MEMORY].
The FM stations the unit can receive are preset in channels 1 to 30
Presetting AM stations
Preparation Tune to the AM frequency where you want presetting
to begin (I) page 20)
Press and hold [MEMORY].
The AM stations the unit can receive are preset in channels 21 to
30 (FM stations are replaced if any were preset in these channels )
During automatic presetting, the memory indicator flashes and the
frequency scrolls The memory indicator and channel numbers are
displayed for a second when a station is preset (m)
The last station to be preset is displayed when presetting finishes
For your reference
Even if the power supply cord is disconnected from the household
AC outlet, the stations remain in memory for approximately one
month
Preset the stations one at a time
@ Tune to the station.
@ Press [MEMORY].
@ Press [TUNING V or A] to select a channel.
@ Press [MEMORY].
Selecting channels
1 Press [PRESET].
The channel number flashes for about 5 seconds
2
Press [TUNING V or A].
Hold down the buttons to change channels faster
On the remote control
Press [CH V or A]
or
Press the numbered buttons
For channels 1 to 9, press the corresponding number
For channels 10 or over, press [>lO], then the two digits
e g To select channel 21 [NO] - [2] - [l]