Technics SA-DX750 Operating Instructions Manual page 19

3
DSP
souNp MoDE
1
I
2'
'
FM MODE
You can tune radio stations manually by selecting the station's
frequency, or you can preset up to 30 stations into channels to
make tuning simpler (+ page 21)
1
Turn [INPUT SELECTOR] to select
"TUNER".
2
Press [BAND] to select "FM" or "AM".
3
Press [TUNING V or A ] to select the
frequency of the station.
Tuning intervals:
FM-02MHz
AM-IOkHz
'TUNED" lights when tuned
"STEREO" lights during FM stereo broadcasts
Automatic tuning
Hold down [TUNING V or A ] until the frequency begins to scroll
Tuning stops when a station is found (Tuning may stop if there is
interference )
Improving reception
FM mode
You can improve FM reception by switching reception to monaural
Press [FM MODE]
"MONO" lights
Press [FM MODE] again to cancel
DSP DEFEAT
You can improve reception by turning off the DSP (+ page 15)
Press and hold [DSP SOUND MODE] until "DEFEAT" appears
Press and hold [DSP SOUND MODE] again to turn the DSP on
For your reference
DVD players can interfere with radio reception Turn the DVD player
off or move it further away from the antennas if this occurs
Direct tuning
@Press [TUNER/BAND].
The band changes each time you press the button
@Press [DIRECT TUNING/DISC ENTER].
@Press the numbered buttons to enter the
frequency.
e g To select 107 9 MHz, press [l] - [0] - [7] - [9]
Tuning intervals
FM-O 1 MHz
AM - 10 kHz
1 If you do not press a button while the cursor is flashing, the
display returns to the frequency being received
2 If the frequency has not been input correctly, "ERROR" will be
displayed