Single Tone Detection; Single Tone Detection Timer; Fax Alert Tone Detection; V.25 Modem Tone Detection - Radio Shack AFX-500 Owner's Manual

Single Tone Detection

Touch-Tone Command: 010 = Off
Default Setting: On
When Single Tone Detection is turned on, the AFX-500 detect
single-frequency tones. When you or the AFX-500 answer a
call, the AFX-500 listens for the following tones for the dura-
tion set by the Single Tone Detection Timer:
• 1100 Hz fax alert (CNG) tone
• 2225 Hz reverse modem tone (if this feature is turned on)
• 1300 Hz V.25 modem tone (if this feature is turned on)
After the time set by the Single Tone Detection Timer (see be-
low), the AFX-500 responds only to transfer codes.
The following AFX-500 features do not operate with Single
Tone Detection turned off:
• Fax CNG Detection
• Modem Calling Tone Detection
• Reverse Modem Detection
Related Commands:

"Single Tone Detection Timer"

"Fax Alert Tone Detection"

"V.25 Modem Tone Detection"

"Reverse Modem Tone Detection"

Single Tone Detection Timer
Touch-Tone Command: 53xx
Default Setting: 10 seconds
This command sets the timer for Single Tone Detection.
Related Commands:
"Single Tone Detection"
16
110 = On
xx = 4 to 30 seconds
Fax Alert Tone Detection
Touch-Tone Command: 011 = Off
Default Setting: On
This command sets the AFX-500 to detect an 1100 Hz fax
alert tone. When you or the AFX-500 answers a call, the AFX-
500 listens for a fax alert tone. If it detects the tone, it routes
the call to the and
FAX FAX/MODEM
Related Commands:
"Single Tone Detection"
V.25 Modem Tone Detection
Touch-Tone Command: 012 = Off
Default Setting: Off
This command sets the AFX-500 to detect a 1300 Hz V.25
modem tone. When you or the AFX-500 answers a call, the
AFX-500 listens for a V.25 modem tone. If it detects the tone,
it routes the call to the
FAX
Related Commands:
"Single Tone Detection"
Reverse Modem Tone Detection
Touch-Tone Command: 013 = Off
Default Setting: Off
This command sets the AFX-500 to detect a 2225 Hz reverse
modem tone. When you or the AFX-500 answers a call, the
AFX-500 listens for a reverse modem tone. If it detects the
tone, it routes the call to the
Related Commands:
"Single Tone Detection"
111 = On
jacks.
112 = On
and jacks.
FAX/MODEM
113 = On
and jacks.
FAX FAX/MODEM