Table of Contents
Advertisement
30
Power Management Setup
This page sets up some parameters for system power management operation.
Main
Advanced
Power Management Setup
Resume By PME
Resume By USB 1.x/2.0 (S3)
EUP Function
Resume By PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI LAN card. You must use an ATX power supply in order to use this feature. Use
this item to do wake-up action if inserting the PCI card.
Resume By USB 1.x2.0 (S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
EUP Support (Enabled)
This item allows user to enable or disable EUP support.
Press <Esc> to return to the Advanced Menu page.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset
Boot
Security
[Disabled]
[Disabled]
[Enabled]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Using BIOS
Exit
About Resume by PME
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Hide quick links:
Advertisement
Table of Contents
