Pc Health Status - ECS H61H-G11 Manual

28

PC Health Status

On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Main Advanced
PC Health Status
Smart Fan Function
CPU Fan Speed
System Fan Speed
-=- PECI Mode -=-
Offset to TCC Activation Temp. :
Smart Fan Function
Scroll to this item and press <Enter> to view the following screen:
Main Advanced
CPU Smart Fan Control
Smart Fan Mode
Smart Fan start PWM value
Smart Fan start PWM TEMP(-)
DeltaT
Smart Fan Slope PWM value
CPU Fan Full Speed Offset (-)
System Smart Fan Control
Smart Fan Mode
Smart Fan start PWM value
Smart Fan start PWM TEMP(-)
DeltaT
Smart Fan Slope PWM value
System Fan Full Speed Offset (-)
CPU Smart Fan Control (Enabled)
This item allows you to enable/disable the control of the CPU fan speed by chang-ing
the fan voltage.
Smart Fan Mode (Normal)
This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a
better operation environment. If you choose Normal mode, the fan speed will be auto
adjusted depending on the CPU temperature. If you choose Quiet mode, the fan speed
will be auto minimized for quiet environment. If you choose Silent mode, the fan
speed will be auto restricted to make system more quietly. If you choose Manual
mode, the fan speed will be adjust depending on users' parameters.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset Boot Security
:
:
-41
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset Boot Security
[Enabled]
[Normal]
180
30
+3
10 PWM value / unite
23
[Enabled]
[Normal]
180
30
+3
10 PWM value / unite
23
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Using BIOS
Exit
Smart Fan Function
1448 RPM
:Select Screen
0 RPM
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Exit
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
:Select Screen