D-Link AirPlus Xtreme G DWL-2100AP Manual page 19

Using the Configuration Menu (continued)
Hexadecimal
digits consist of
the numbers 0-9
and the letters A-F
ASCII (American
Standard Code
for Information
Interchange) is a
code for repre-
senting English
letters as num-
bers from 0-127
Wireless Band-
Authentication-
Encryption-
Key Type-
Key Size-
Valid Key-
Key Table-
Apply-
Advanced > Encryption
802.11g is selected here
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to communicate the key and
require identical WEP settings to communicate.
When you select WPA, you will be directed to the screen shown on
the next page.
Select Disabled or Enabled.
Select HEX or ASCII.
Select 64-, 128-, 152-bits.
Select the 1st through the 4th key to be the active key.
Input up to four keys for encryption. You will select one of these
keys in the valid key field.
Click Apply to save changes.
19