D-Link AirPlus Xtreme G DWL-2100AP Manual page 18

Using the Configuration Menu (continued)
Super G Mode (continued)
Super G without
Turbo-
Super G with
Dynamic Turbo-
Super G with
Static Turbo-
The following fields are available for configuration in this window:
Access Control-
Access Control
List-
Apply-
Capable of Packet Bursting, FastFrames, Compression, and no
Turbo mode.
Capable of Packet Bursting, FastFrames, Compression, and
Dynamic Turbo. This setting is backwards compatible with non-
Turbo (legacy) devices. Dynamic Turbo mode is only enabled
when all devices on the wireless network are configured with
Super G with Dynamic Turbo enabled.
Capable of Packet Bursting, FastFrames, Compression, and
Static Turbo. This setting is not backwards compatible with non-
Turbo (legacy) devices. Static turbo mode is always on and is
only enabled when all the devices on the wireless network are
configured with Super G with Static Turbo enabled.
Advanced > Filters
Select Disabled to disable the filters function.
Select Accept to accept only those devices with MAC addresses
in the Access Control List.
Select Reject to reject the devices with MAC addresses in the
Access Control List.
The MAC addresses in this list can be accepted or rejected for
inclusion in the network, depending upon the Access Control
selection.
Click Apply to save the changes
18