D-Link AirPlus Xtreme G DWL-2100AP Manual page 14

802.11g wireless 108mbps access point

Hide thumbs Also See for AirPlus Xtreme G DWL-2100AP:

Table of Contents

Using the Configuration Menu (continued)

Home > Wireless

Wireless

Band-

Select 802.11g or 802.11b and 802.11g.

SSID-

Service Set Identifier (SSID) is the name designated for a specific wire-

less local area network (WLAN). The SSID's factory default setting is

default. The SSID can be easily changed to connect to an existing

wireless network or to establish a new wireless network.

SSID

Broadcast-

Enable or Disable SSID Broadcast. Enabling this feature broadcasts the

SSID across the network.

Channel-

6 is the default channel. All devices on the network must share the same

channel.

Radio

Frequency-

The radio frequency will remain at 2.437 GHz .

Apply-

Click Apply to save the changes.

Table of Contents