Standard Horizon CP150 Owner's Manual page 75

User Points
Finds Marks or Waypoints saved by the user.
'MENU' + "FIND" + 'ENTER' + "USER POINTS" + 'ENTER'
User Points
Turns Hidden/Visible/Icon the displaying of the User Point Name. The default setting is Visible.
'MENU' + "GENERAL SETUP" + 'ENTER" + "USER POINTS" + 'ENTER'
User Points List
Displays the User Points List page on the screen.
'MENU' + "USER POINTS LIST" + 'ENTER'
UTC = Universal Time Coordinated
A time scale based on the rotation of the earth that is used by most broadcast time services.
(Magnetic) Variation
It is possible to calculate the Magnetic Variation in an Auto(matic) or manual mode, by inserting the
step for calculation of Magnetic Variation. The default setting is Auto.
'MENU' + "ADVANCED SETUP" + 'ENTER' + "COMPASS + 'ENTER' + "VARIATION" + 'ENTER'
Visible (Track)
To enable (On) or disable (Off) the displaying of Track. The default setting is On.
'MENU' + "TRACK" + 'ENTER' + "VISIBLE" + 'ENTER'
WAAS = Wide Area Augmentation System
The Federal Aviation Administration (FAA), in cooperation with other DOT organizations and DOD, is
augmenting the GPS/SPS with a satellite-based augmentation system, the Wide Area Augmentation
System. It will provide a signal-in-space to WAAS users to support en Route through precision
approach navigation. After achieving initial operational capability, the WAAS will then be incrementally
improved over the next years to expand the area of coverage, increase the availability of precision
approaches, increase signal redundancy, and reduce operational restrictions.
Waypoint
Any point to which one intends to navigate. A sequence of Waypoints makes up a Route plan.
Inserting Waypoint: 'ENTER' + "ROUTE" + 'ENTER'
Moving Waypoint: Place cursor on existing Waypoint +'ENTER' + "MOVE" + 'ENTER' + move cursor +
'ENTER'
Deleting Waypoint: Place cursor on existing Waypoint + 'ENTER' + "DELETE" + 'ENTER'
Editing Waypoint: Place cursor on existing Waypoint + 'ENTER' + "EDIT" + 'ENTER' + Modify symbol,
Cursor and coordinates + 'ENTER'
Inserting Waypoint: Place cursor on Route leg + 'ENTER' + "INSERT." + 'ENTER' + move cursor + 'ENTER'
Finding Waypoint: 'MENU' + "FIND" + 'ENTER' + "USER POINTS" + 'ENTER'
(NMEA) Wind Speed Trend page
'MENU' + "NMEA DISPLAY" + 'ENTER' + "WIND SPEED TREND" + 'ENTER'
Shows the graph of the Apparent Wind Speed received from the NMEA Port. Pressing 'ZOOM IN'/
'ZOOM OUT' changes the time scale.
WGS-84 = World Geodetic System 1984
Coordinate System or Datum developed by the Defense Mapping Agency (DMA) (see Part A of
" Handbook").
GPS Chart 150
Figure 8l - Wind Speed Graph Page
Page 77