Integrated Peripherals - ECS 845PE-A800 Manual

Integrated Peripherals

These options display items that define the operation of peripheral components on the
system's input/output ports.
Phoenix-AwardBIOS CMOS Setup Utility
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
AC97 Modem
Onboard LAN Device
Init Display First
IDE HDD Block Mode
: Move Enter: Select
F5:Previous Values
On-Chip Primary PCI IDE (Enabled)
Use these items to enable or disable the PCI IDE channels that are integrated on the
motherboard.
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four items let you
assign the kind of PIO (Programmed Input/Output) was used by the IDE devices. Choose
Auto to let the system auto detect which PIO mode is best, or select a PIO mode from 0-
4.
IDE Primary/Secondary Master/Slave UDMA (Auto)
Each IDE channel supports a master device and a slave device. This motherboard supports
UltraDMA technology, which provides faster access to IDE devices.
If you install a device that supports UltraDMA, change the appropriate item on this list to
Auto. You may have to install the UltraDMA driver supplied with this motherboard in order
to use an UltraDMA device.
USB Controller (Enabled)
Enable this item if you plan to use the Universal Serial Bus ports on this motherboard.
USB 2.0 Controller (Enabled)
Enable this item if want to use the USB 2.0 controller.
USB Keyboard Support (Enabled)
Enable this item if you plan to use a keyboard connected through the USB port in a legacy
operating system (such as DOS) that does not support Plug and Play.
Integrated Peripherals
[Enabled]
Item Help
[Auto]
[Auto]
[Auto]
Menu Level
[Auto]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Auto]
[Auto]
[Enabled]
1 2
1 2
[PCI Slot]
1 2
[Enabled]
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults F7:Optimized Defaults
Using BIOS
33