Table of Contents
Advertisement
Resume by Alarm (Disabled)
When set to Enabled, additional fields become available and you can set the date (day of the
month), hour, minute and second to turn on your system. When set to 0 (zero) for the day
of the month, the alarm will power on your system every day at the specified time.
•
Date (of Month) Alarm (0): Date (of Month) Alarm lets you select a day from
1 to 31.
•
Time (hh:mm:ss) Alarm (0:0:0): Time Alarm lets you select a time for the
alarm in hours, minutes, and seconds.
** Reload Global Timer Events **
These fields determine which events waken the system from power saving mode.
Primary/Secondary IDE (Disabled)
When this item is enabled, the system power will resume the system from a power saving
mode if there is any activity on primary or secondary IDE channels 0 or 1.
FDD, COM, LPT Port (Disabled)
When this item is enabled, the system will restart the power-saving timeout counters when
any activity is detected on the floppy disk drive, serial ports, or the parallel port.
PCI PIRQ[A-D]# (Disabled)
When this item is enabled, any activity from one of the listed devices wakes up the system.
PWRON After PWR-Fail (Off)
This item enables your computer to automatically restart or return to its last operating
status after power returns from a power failure.
Using BIOS
37
Advertisement
Table of Contents
