Denon DBT-3313UD Owner's Manual page 32

Adjusting the picture quality (Picture control)
You can adjust the picture quality to your liking.
The adjusted values can be stored in Memory 1 through Memory 5.
1
Press PICTURE ADJUST .
The currently set status is displayed.
Memory1
3 D N R
B N R
MN R
Co n trast
0
B righ tn e ss
Gamma Correcti...
2
Press ui to select a memory number to be used, and then press
3
Press ui to select an item then press
4
ui
Change the setting with .
• Refer to the table on the right for information on the different settings.
n To finalize picture adjustments
PICTURE ADJUST
Press after adjusting.
• The pop up menu of the picture adjustments is disappeared on the screen.
The picture adjustment settings are retained in memory even after the power is turned off.
NOTE
• During 3D playback, you cannot adjust "Video resolution"
quality (Picture control)" (vpage 29).
• You cannot set picture adjustments individually for each HDMI output.
DVD
ENTER .
ENTER or p.
(vpage 28) or "Adjusting the picture
Setting items
3DNR
Reduces noise in the entire picture.
BNR
Reduces the block noise generated by digital
processing.
MNR
Reduces the noise around the outline of an
object generated by digital processing.
Contrast
Adjusts picture contrast.
Brightness
Adjusts picture brightness.
Gamma Correction
Changes the amount of gamma correction to
adjust overall brightness of a picture.
Make Dark(–) / Bright(+) section easier to see.
Sharpness
Adjusts picture sharpness for the higher
frequency range.
Hue (color tone)
Adjusts the green and red color balance.
Chroma Level
Adjusts the color density.
29
Settings enabled during playback
Setting contents Default
0 – +3 0
0 – +3 0
0 – +3 0
–6 – +6 0
0 – +12 0
–4 – +4 0
–6 – +6 0
–6 – +6 0
–6 – +6 0